Florida Natural Areas Inventory 19950300 20010000 shapefile http://www.fnai.org fnaica01 This dataset illustrates areas of conservation interest as categorized by the Florida Natural Areas Inventory (FNAI). The FNAI data are designed to provide information about significant natural resources for use by the Regional Planning Councils in preparing their Strategic Policy Plans. Areas of Conservation Interest (ACIs) are sites that support currently unprotected examples of important natural resources; the ACIs are delineated into three categories. Lands already on Florida's Conservation and Recreation Lands (CARL) and Save Our Rivers (SOR) project lists are excluded. Areas of Conservation Interest Category A were initially identified on the basis of FNAI-documented occurrences of rare, imperiled, or outstanding examples/populations of animals, plants, or natural communities, then supplemented by aerial photographic interpretation of landscape vegetation surrounding the particular occurrence. Each site contains one or more occurrences of FNAI-tracked species or natural communities. These sites provide a means for describing areas of land that support habitat for rare, threatened, or endangered species or which contain exemplary natural communities. They are distinct from Managed Areas in that they are not under some formal, unified (and often legal) level of protection or stewardship. These sites represent a significant portion of the habitat for rare, threatened or endangered species and natural communities and as such, FNAI recommends that they be given priority status in acquisition and protection plans. en 19950300 ground condition Complete Irregular -82.663385 -82.040266 29.939313 29.422649 529494.323302568559.675869609708.834024651301.407329 NONE Florida Natural Areas Inventory Areas of Conservation Interest FNAI Conservation Planning Habitat Land use NONE Florida United States Areas of Conservation Interest NONE 1990's NONE THE DATA INCLUDED IN THIS APPLICATION ARE BASED ON INTERPRETATION OF AVAILABLE INFORMATION AND SHOULD NOT BE CONSTRUED AS LEGALLY BINDING. Scale is an important factor in data usage. Certain scale data sets are not suitable for some projects, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale data sets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale data sets are recommended for projects that are at the multi-county or regional level. 1:250000 scale data sets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analyses. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our web pages at: http://www.geoplan.ufl.edu/education.html For more information, visit: http://www.fnai.org Florida Natural Areas Inventory 19950300 Map ShapefileWeb site: http://www.fgdl.orgTechnical Support: http://www.fgdl.org/fgdlfeed.htmlFGDL Frequently Asked Questions: http://www.fgdl.org/fgdlfaq.htmlFGDL Mailing Lists: http://www.fgdl.org/fgdl-l.htmlFlorida Geographic Data Library (FGDL)mailing and physical address

431 Architecture PO Box 115706

GainesvilleFL32611-5706USAFor FGDL Software: http://www.fgdl.org/software.html The occurrence information upon which the sites are based comes from a variety of sources that include field surveys by FNAI staff, published and unpublished materials, herbaria and museum collections, and contacts with knowledgeable persons. Relied on the integrity of the attribute information within the original data layer. Please note that this point coverage was converted from information obtained from the Florida Division of Emergency Management. Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Florida Natural Areas Inventory 19950300 Map 123000 Map 19950300 ground condition FNAI Data representing areas of conservation interest as categorized by the Florida Natural Areas Inventory (FNAI). The process step describes, in general, the process used in the production of data sets. The originating agencies created the original spatial coverage. GeoPlan, during the QA/QC process included the following aspects: (1) Reprojected data to FGDL Albers (2) Set Precision to DOUBLE (3) Set Tolerances to FGDL Standards (4) Added DESCRIPT item based on the NAME item 20000000 coordinate pair 0.000064 0.000064 meters Albers Conical Equal Area24.00000031.500000-84.00000024.000000400000.0000000.000000 D_North_American_1983_HARN Geodetic Reference System 80 6378137.000000 298.257222 GCS_North_American_1983_HARNCustom fnaica01 Data base file FNAI record Feature Class11 FID Internal feature number. ESRI FIDOID400 Shape Data attribute inherent to the ESRI shapefile format, which defines the data as a point, polyline, or polygon. FGDL ShapeGeometry000 AREA Area of the polygon in meters FGDL AREANumber185 PERIMETER Perimeter of the polygon in meters FGDL PERIMETERNumber185 FNAICA_ ArcInfo internal coverage item FGDL Unknown FNAICA_Number11 FNAICA_ID ArcInfo internal coverage item FGDL FNAICA_IDNumber11 STATUSFour-digit code that designates the Areas of Conservation Interest category.FNAI record ACIAArea of Conservation Interest Category ASame OUT PNot in an ACISame ACRES Acreage of Area of Conservation Interest. Same ACRESNumber10 SITEIDSITEIDNumber5Five-digit code identifying FNAI's site ID. Same SCODESCODEString14FNAI's site code.Same NAMENAMEString78The name of the site (incomplete).Same QUADQUADString48The USGS 7.5-minute topo quad code(s) where the site is located. This can also include the site number that may be recorded on FNAI's paper map(s).Same RPC Abbreviation of the Regional Planning District in which the Area of Conservation Interest is located. unknown APA Apalachee Same CFL Central Florida Same ECF East Central Florida Same NCF North Central Same NEF North East Same SFL South Florida Same SWF South West Florida Same TBY Tampa Bay Same TRC Treasure Coast Same WFL West Florida Same STATUSString5 DESCRIPTDESCRIPTString100 Based on Name Item: see NAME above.FGDL Operator FLORIDA GEOGRAPHIC DATA LIBRARY Physical

431 Architecture Building PO Box 115706

Gainesville Florida 32611-5706 (352) 3920997, Operator http://www.fgdl.org/fgdldocs/document/techsupp.htm 24 Hours / Day Please visit the web site, http://www.fgdl.org, for all questions or concerns. Florida Geographic Data Library is a product of the University of Florida GeoPlan Center with support from the Florida Department of Transportation and the Florida Department of Environmental Protection. THE FGDL DATA AS PROVIDED BY CONTRIBUTING ORGANIZATIONS AND ANY PROGRAMMING SOFTWARE CREATED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER (COLLECTIVELY THE "MATERIALS") ARE COPYRIGHTED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER FOR THE FGDL CONTRIBUTING AGENCIES AND ORGANIZATIONS (THE "DATA PROVIDERS"). DO NOT REPRODUCE, REDISTRIBUTE OR RESELL THE MATERIALS, OR PROVIDE THE MATERIALS FOR FREE TO CUSTOMERS OR CLIENTS, OR PLACE THE MATERIALS FOR DOWNLOAD ON A WEBSITE. ADDITIONALLY, WHEN USING FGDL DATA OR SOFTWARE IN PROJECTS, MAPS, ETC.; YOU AGREE TO ACKNOWLEDGE THE FGDL AS A DATA SOURCE. THE MATERIALS ARE PROVIDED "AS IS". THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE QUALITY OR SUITABILITY OF THE MATERIALS, EITHER EXPRESSLY OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO WARRANTIES, GUARANTIES OR REPRESENTATIONS AS TO THE TRUTH, ACCURACY OR COMPLETENESS OF THE DATA PROVIDED BY THE FGDL CONTRIBUTING ORGANIZATIONS. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS. 2001 Operator Physical

1018 Thomasville Road

Tallahassee FL 32303 (850) 224-8207 FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998 enlocal timehttp://www.esri.com/metadata/esriprof80.htmlESRI Metadata Profile {1AC4433C-D5BA-4FFA-84E4-16009CB35B59}2002102811280000FALSE20021028112800002002102914454200Microsoft Windows 2000 Version 5.0 (Build 2195) Service Pack 2; ESRI ArcCatalog 8.2.0.700fnaica01529494.323302568559.675869651301.407329609708.8340241-82.662404-82.25284429.86231629.483321ISO 19115 Geographic Information - MetadataDIS_ESRI1.0dataset002file://\\Atlas\geo3\finaldata\v3\alachua\fnaica01.shpLocal Area Network0.032ShapefileSimplePolygonFALSE11FALSEFALSECustom1120021029