University of Florida GeoPlan Center unknown 20010000 vector digital data University of Florida GeoPlan Center This dataset contains FDOT district boundaries. This dataset provides location and attribute information on the FDOT district boundaries buffered by 5 miles. unknown unknown publication date Complete As needed -87.726217 -79.785430 31.115377 24.382035 None boundaries ISO 19115 Topic Categories boundaries None Southeast United States Florida Southeast U.S None 2000 None THE DATA INCLUDED IN FGDL ARE 'AS IS' AND SHOULD NOT BE CONSTRUED AS LEGALLY BINDING. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS A note about data scale: Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: http://geoplan.ufl.edu/education.html Florida Geographic Data Library (FGDL) mailing

431 Architecture PO Box 115706

Gainesville Florida 32611-5706 FGDL Mailing Lists: http://www.fgdl.org/fgdl-l.html FGDL Frequently Asked Questions: http://www.fgdl.org/fgdlfaq.html Technical Support: http://www.fgdl.org/fgdlfeed.html For FGDL Software: http://www.fgdl.org/software.html Web site: http://www.fgdl.org Version 6.2 (Build 9200) ; Esri ArcGIS 10.7.1.11595 FLORIDA GEOGRAPHIC DATA LIBRARY Map GeoPlan relied on the integrity of the attribute information within the original data. Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." This data is provided 'as is' and its horizontal positional accuracy has not been verified by GeoPlan This data is provided 'as is' and its vertical positional accuracy has not been verified by GeoPlan FLORIDA GEOGRAPHIC DATA LIBRARY 19901001 Map 100000 None 19901001 19901001 Ground conditions FGDL Spatial and Attribute Information The process step describes, in general, the process used in the production of data sets. The originating agencies created the original spatial coverage. GeoPlan, during the QA/QC process included the following aspects: (1) Reprojected data to FGDL Albers (2) Set Precision to DOUBLE (3) Set Tolerances to FGDL Standards. (4) Descript item was added and set equal to the DOTDIST unknown Buffered by 5 miles GeoPlan 20120601 Vector GT-polygon composed of chains 7 NAD 1983 HARN Florida GDL Albers 24.0 31.5 -84.0 24.0 400000.0 0.0 coordinate pair 0.0001 0.0001 meter D North American 1983 HARN GRS 1980 6378137.0 298.257222101 DATABASE FILE Database File None OBJECTID Feature geometry. ESRI Coordinates defining the features. SHAPE.AREA Internal feature number. Esri Sequential unique whole numbers that are automatically generated. SHAPE.LEN Internal feature number. Esri Sequential unique whole numbers that are automatically generated. SHAPE Feature geometry. ESRI Coordinates defining the features. AUTOID Internal feature number. ESRI Sequential unique whole numbers that are automatically generated. Descript Describes the district number. Unknown Same DOTDIST FK_ORG DESCRIPT FLORIDA GEOGRAPHIC DATA LIBRARY Operator mailing

431 Architecture PO Box 115706

Gainesville Florida 32611-5706 US (352) 3920997, Operator Web site: http://www.fgdl.org For FGDL Software: http://www.fgdl.org/software.html Technical Support: http://www.fgdl.org/fgdlfeed.html Mailing list for FGDL: http://www.fgdl.org/fgdl-l.html FGDL Frequently Asked Questions: http://www.fgdl.org/fgdlfaq.html 24 Hours / Day Please visit the web site, http://www.fgdl.org, for all questions or concerns. DOWNLOADABLE DATA THE FGDL DATA AS PROVIDED BY CONTRIBUTING ORGANIZATIONS AND ANY PROGRAMMING SOFTWARE CREATED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER (COLLECTIVELY THE 'MATERIALS') ARE COPYRIGHTED BY THE UNIVERSITY OF FLORIDA GEOPLAN CENTER FOR THE FGDL CONTRIBUTING AGENCIES AND ORGANIZATIONS (THE 'DATA PROVIDERS'). DO NOT REPRODUCE, REDISTRIBUTE OR RESELL THE MATERIALS, OR PROVIDE THE MATERIALS FOR FREE TO CUSTOMERS OR CLIENTS, OR PLACE THE MATERIALS FOR DOWNLOAD ON A WEBSITE. ADDITIONALLY, WHEN USING FGDL DATA OR SOFTWARE IN PROJECTS, MAPS, ETC.; YOU AGREE TO ACKNOWLEDGE THE FGDL AS A DATA SOURCE. THE MATERIALS ARE PROVIDED 'AS IS'. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO REPRESENTATIONS OR WARRANTIES ABOUT THE QUALITY OR SUITABILITY OF THE MATERIALS, EITHER EXPRESSLY OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER MAKES NO WARRANTIES, GUARANTIES OR REPRESENTATIONS AS TO THE TRUTH, ACCURACY OR COMPLETENESS OF THE DATA PROVIDED BY THE FGDL CONTRIBUTING ORGANIZATIONS. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS. 20200302 Operator physical

431 Architecture Building PO Box 115706

Gainesville FL 232611-5706 (352) 3920997 FGDC Content Standard for Digital Geospatial Metadata FGDC-STD-001-1998 local time