University of Florida GeoPlan Center unknown 20010000 vector digital data University of Florida GeoPlan Center This dataset contains FDOT district boundaries. This dataset provides location and attribute information on the FDOT district boundaries. unknown unknown publication date Complete As needed -87.639410 -79.872549 31.042833 24.456926 None boundaries ISO 19115 Topic Categories boundaries None Southeast United States Southeast U.S Florida None 2000 None THE DATA INCLUDED IN FGDL ARE 'AS IS' AND SHOULD NOT BE CONSTRUED AS LEGALLY BINDING. THE UNIVERSITY OF FLORIDA GEOPLAN CENTER SHALL NOT BE LIABLE FOR ANY DAMAGES SUFFERED AS A RESULT OF USING, MODIFYING, CONTRIBUTING OR DISTRIBUTING THE MATERIALS A note about data scale: Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: http://geoplan.ufl.edu/education.html Florida Geographic Data Library (FGDL) mailing

431 Architecture PO Box 115706

Gainesville Florida 32611-5706 Technical Support: http://www.fgdl.org/fgdlfeed.html Web site: http://www.fgdl.org For FGDL Software: http://www.fgdl.org/software.html FGDL Mailing Lists: http://www.fgdl.org/fgdl-l.html FGDL Frequently Asked Questions: http://www.fgdl.org/fgdlfaq.html Version 6.2 (Build 9200) ; Esri ArcGIS 10.7.1.11595 FLORIDA GEOGRAPHIC DATA LIBRARY Map GeoPlan relied on the integrity of the attribute information within the original data. Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout the transfer, and the chains representing the limits of the file (neatline) are free of gaps. The neatline is generated by connecting the four corners of the digital file, as established during initialization of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. (Exception: During the QA/QC process all data is examined and if errors are found and corrections are possible, then data is corrected accordingly. This process is documented in the Process_Step.) Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline, that is, with the longitude/latitude lines in geographic coordinates. All internal polygons are tested for closure. Certain attributes and/or entities, e.g. closure line, convey data quality information. When information to be encoded in the subfield is known to be not applicable (undefined, not relevant), then the subfield is valued by a string of "9s"; and when the information to be encoded is relevant but unknown (or missing), then the subfield is valued by a string of "9s." This data is provided 'as is' and its horizontal positional accuracy has not been verified by GeoPlan This data is provided 'as is' and its vertical positional accuracy has not been verified by GeoPlan FLORIDA GEOGRAPHIC DATA LIBRARY 19901001 Map 100000 None 19901001 19901001 Ground conditions FGDL Spatial and Attribute Information The process step describes, in general, the process used in the production of data sets. The originating agencies created the original spatial coverage. GeoPlan, during the QA/QC process included the following aspects: (1) Reprojected data to FGDL Albers (2) Set Precision to DOUBLE (3) Set Tolerances to FGDL Standards. (4) Descript item was added and set equal to the DOTDIST unknown Vector GT-polygon composed of chains 7 NAD 1983 HARN Florida GDL Albers 24.0 31.5 -84.0 24.0 400000.0 0.0 coordinate pair 0.0001 0.0001 meter D North American 1983 HARN GRS 1980 6378137.0 298.257222101 DOTBND Database File None OBJECTID_1 Internal feature number. ESRI Sequential unique whole numbers that are automatically generated. DOTDIST DESCRIPT OBJECTID Feature geometry. ESRI Coordinates defining the features. SHAPE Feature geometry. ESRI Coordinates defining the features. AUTOID SHAPE.AREA SHAPE.LEN Descript Describes the district number. Unknown Same FLORIDA GEOGRAPHIC DATA LIBRARY Operator mailing

431 Architecture PO Box 115706

Gainesville Florida 32611-5706 US Mailing list for FGDL: http://www.fgdl.org/fgdl-l.html For FGDL Software: http://www.fgdl.org/software.html Web site: http://www.fgdl.org Technical Support: http://www.fgdl.org/fgdlfeed.html FGDL Frequently Asked Questions: http://www.fgdl.org/fgdlfaq.html DOWNLOADABLE DATA The Florida Geographic Data Library is a collection of Geospatial Data compiled by the University of Florida GeoPlan Center with support from the Florida Department of Transportation. GIS data available in FGDL is collected from various state, federal, and other agencies (data sources) who are data stewards, producers, or publishers. The data available in FGDL may not be the most current version of the data offered by the data source. University of Florida GeoPlan Center makes no guarantees about the currentness of the data and suggests that data users check with the data source to see if more recent versions of the data exist. Furthermore, the GIS data available in the FGDL are provided 'as is'. The University of Florida GeoPlan Center makes no warranties, guaranties or representations as to the truth, accuracy or completeness of the data provided by the data sources. The University of Florida GeoPlan Center makes no representations or warranties about the quality or suitability of the materials, either expressly or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. The University of Florida GeoPlan Center shall not be liable for any damages suffered as a result of using, modifying, contributing or distributing the materials. A note about data scale: Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: http://geoplan.ufl.edu/education.html 20210525 Operator physical

431 Architecture Building PO Box 115706

Gainesville FL 232611-5706 (352) 3920997 FGDC Content Standard for Digital Geospatial Metadata FGDC-STD-001-1998 local time