Please Note: The Figure Numbers, Notes and Map language has been changed for the FBC 2020 preliminary maps. ---------------------- New Figure Numbers: ---------------------- Figure 1609.3(4) Risk Cat I Notes: 1. Values are ultimate design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10 m) above ground for Exposure C category. 2. Linear interpolation between contours is permitted. 3. Islands and coastal areas outside the last contour shall use the last wind speed contour of the coastal area. 4. Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions. 5. Wind speeds correspond to approximately a 15% probability of exceedance in 50 years (Annual Exceedance Probability = 0.00333, MRI = 300 years). Figure 1609.3(1) Risk Cat II Notes: 1. Values are ultimate design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10 m) above ground for Exposure C category. 2. Linear interpolation between contours is permitted. 3. Islands and coastal areas outside the last contour shall use the last wind speed contour of the coastal area. 4. Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions. 5. Wind speeds correspond to approximately a 7% probability of exceedance in 50 years (Annual Exceedance Probability = 0.00143, MRI = 700 years). Figure 1609.3(2) Risk Cat III Notes: 1. Values are ultimate design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10 m) above ground for Exposure C category. 2. Linear interpolation between contours is permitted. 3. Islands and coastal areas outside the last contour shall use the last wind speed contour of the coastal area. 4. Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions. 5. Wind speeds correspond to approximately a 3% probability of exceedance in 50 years (Annual Exceedance Probability = 0.000588, MRI = 1700 years). Figure 1609.3(3) Risk Cat IV Notes: 1. Values are ultimate design 3-second gust wind speeds in miles per hour (m/s) at 33 ft (10 m) above ground for Exposure C category. 2. Linear interpolation between contours is permitted. 3. Islands and coastal areas outside the last contour shall use the last wind speed contour of the coastal area. 4. Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions. 5. Wind speeds correspond to approximately a 1.6% chance of exceedance in 50 years (Annual Exceedance Probability = 0.00033, MRI = 3000 years). ---------------------- OLD 2011 map language: ---------------------- BASIC WIND SPEED. The basic wind speed in miles per hour, for the development of wind loads, shall be determined from Figure 1609. The exact location of wind speed lines shall be established by local ordinance using recognized physical landmarks such as major roads, canals, rivers and lake shores whenever possible. WIND-BORNE DEBRIS REGION. Areas within hurricane- prone regions located: 1. Within 1 mile (1.61 km) of the coastal mean high water line where the ultimate design wind speed Vult is 130 mph (48 m/s) or greater; or 2. In areas where the ultimate design wind speed Vult is 140 mph (53 m/s) or greater For Risk Category II buildings and structures and occupancy category III buildings and structures, except health care facilities, the windborne debris region shall be based on Figure 1609A. For occupancy category IV buildings and structures and occupancy category III health care facilities, the windborne debris region shall be based on Figure 1609B. ---------------------- NEW 2020 map language: ---------------------- BASIC WIND SPEED. The basic wind speed in miles per hour, for the development of wind loads, shall be determined from Figure 1609.3. The exact location of wind speed lines shall be established by local ordinance using recognized physical landmarks such as major roads, canals, rivers and lake shores whenever possible. WIND-BORNE DEBRIS REGION. Areas within hurricane- prone regions located: 1. Within 1 mile (1.61 km) of the coastal mean high water line where the ultimate design wind speed Vult is 130 mph (58 m/s) or greater; or 2. In areas where the ultimate design wind speed Vult is 140 mph (63.6 m/s) or greater For Risk Category II buildings and other structures and Risk Category III buildings and other structures, except health care facilities, the windborne debris region shall be based on Figure 1609.3(1). For Risk Category III health care facilities, the windborne debris region shall be based on Figure 1609.3(2). For Risk Category IV buildings and other structures, the windborne debris region shall be based on Figure 1609.3(3).